PXR Family

PXR_PT

Grab

Drive Mode

Sync Mode/Polarity

Frame Size

Trigger

Gain/Offset

RTC Timing

RTC Start/Stop

Termination

PXR_PT User Guide

Home Page
Feedback at:
CSinfo@cyberoptics.com or
1-800-366-9131
PXR Productivity Tool
Gain / Offset Setup Dialog
Gain Set-up Dialog
Control and configure parameters for the following API commands:
  • SetGainRange()

    • Sets the gain range of the incoming video to either 0 or 1. If the range is 0, the video is assumed to be 1 volt peak to peak. If the range is 1, the video is amplified by a factor of two before being digitized.
  • SetFineGain()

    • Adjusts the fine gain from 0 to 255 where 128 is the default value.
  • SetOffset()

    • Sets the video offset level between -128 and 127 where 0 is the default value and makes the video blanking level roughly a zero pixel value.
  • SetNyquistFilter()

    • Sets the Nyquist filter to either ON (filters high-frequency components) or OFF.
Download PXR_PT